SEVESO PROFILE Cupboard Handle - 2.4m long (cut to size) - ANODISED ALUMINIUM (HETTICH - New Modern)

SEVESO
Profile Pull Handle

** requires router installation
 

HETTICH handles are available SPECIAL ORDER ONLY from Germany.  Please note that 3-4 WEEKS Lead Time applies.

It is recommended that this Cut to Size Profile Handle is installed by a qualified carpenter / kitchen fitter
Please refer to the Dimensional Drawing for all measurements required for successful router installation

Measurement 1 and 3 on the dimensional drawing are 17mm or 19mm as applicable

Measurement 2 on the dimensional drawing is 3mm

** This handle requires a horizontal cut-out along the top edge of the cabinet or drawer. The handle slots over the top of the drawer or cabinet. To fit, create a horizontal cut-out (8mm deep and 3mm wide) along the top edge of the cabinet or drawer to slot the handle into place. This will extend the cabinet or drawer height by 38mm so please ensure there is enough clearance for this. The cut out will need to be made using a specific tool such as a circular saw or router - the handle is not fixed using fixing screws, but knocked into place into the slot as described above. Adhesive may be used for an extra-secure fit.

Further details of the handles dimensional specifications can be viewed above