| This handle is now discontinued in SIZES MARKED * and is only available while supplier stocks last.
Please contact us prior to placing your order to confirm current stock availability
as supplier stock levels are subject to change day by day. It is recommended that this Profile Handle is installed by a qualified carpenter / kitchen fitter
Please refer to the Dimensional Drawing for all measurements required for successful router installation ** This handle requires a horizontal cut-out along the top edge of the cabinet or drawer. The handle slots over the top of the drawer or cabinet. To fit, create a horizontal cut-out (11mm deep and 2.6mm wide) along the top edge of the cabinet or drawer to slot the handle into place. This will extend the cabinet or drawer height by 3mm so please ensure there is enough clearance for this. The cut out will need to be made using a specific tool such as a circular saw or router - the handle is not fixed using fixing screws, but knocked into place into the slot as described above. Adhesive may be used for an extra-secure fit. This handle is available to suit a range of cabinets and drawers, from 295mm length to 1195mm (so to suit a 300mm wide up to 1200mm wide drawer or door front specifically) Further details of the handles dimensional specifications can be viewed above | 
-42463-p.jpg)
-39769-p.jpg)
-39789-p.jpg)
-39789-p.jpg)
-39769-p.jpg)
-39764-dv-p.jpg)
